The entrance into the PET FLAT product line.

A universally mountable wall adapter with integrated PET FLAT Adapter becomes the center for PET recycling in the household. PET FLAT Hand is used in all those places where PET wrappings accumulate in small amounts. Through a double-effective hand pump (suction/pressure), the air is sucked from bottles which are thereby flattened in this most simple way. Of course the pump can also be used for other purposes. Inflating an air mattress, a dinghy or balloons becomes a piece of cake with PET FLAT Hand.

The vacuum pump that is installed in a robust compact-case, delivers two advantages to the user in one device.

In the sucking mode, the PET FLAT adapter flattens every bottle. In the pressure mode, the device has an especially long endurance for the inflation of airbeds, dinghies or for bike tires, etc.
 

For en route use, the device is available with a 12V DC engine. For home use it can also be obtained with a 220V/50Hz as well as a 130V/60Hz AC engine.

The device is offered at a very favorable price in direct marketing via tele shopping as well as in special promotions at do-it-yourself stores and supermarkets.

For simple and optically appealing installation directly in kitchens or close to recycling bins in storage rooms, cellars or in garages.

PET FLAT Integral consists of the patented PET FLAT Adapter and a powerful vacuum pump designed specifically for home use. Because of the small build of only 90 mm, the vacuum unit can be placed invisibly behind a base blind in normally unused hollow spaces under kitchen cupboards. Visible are only the opening of the PET FLAT Adapter which is integrated into the furniture as well as the practical pedal switch in the base blind.


The majority of common PET bottles fit into the patented PET FLAT standard adapter. For less common dimensions and also for Tetra-Paks with screwed caps, canisters and detergent bottles, fitting intermediate pieces are available. By request, decorative cover caps can be provided into which, for example, cupboard handles used in kitchens are assembled.

Big tasks require big solutions. PET FLAT Profi Indoor is designed for high quantities and piece numbers in the indoor sector.

As stand-alone device, it is immediately clear to consumers where in public indoor spaces the recycling center for empty PET bottles is located.

In combination with a vacuum storage, an efficient electrical vacuum pump turns the flattening into a quick delight and makes waiting unnecessary. Within fractions of a second, each PET bottle is turned into a flat hip flask and can be disposed of in a nearby recycle bin. Flat bottle - small slot.

Thanks to the reduction of slots in tubs or containers, the recycling of other trash is made much more difficult for dump tourists. Less volume and higher pureness of recyclable material in the recycle bin are the correct way towards the correct direction.

The robust stand-alone device directs consumers in public outdoor spaces to the recycling center for empty PET bottles.

In combination with a vacuum storage, an efficient electrical vacuum pump turns the flattening into a quick delight and makes waiting unnecessary. Within fractions of a second, each PET bottle is turned into a flat hip flask and can be disposed of in a nearby recycle bin. Flat bottle – small slot. Thanks to the reduction of slots in tubs or containers, the recycling of other trash is made much more difficult for dump tourists. Less volume and higher pureness of recyclable material in the recycle bin are the correct way towards the correct direction.

The drive of the vacuum pump is either provided by electric supply or by photovoltaics with integrated buffer batteries. After all it is well-known that efficient recycling does not depend on the time of day. An energy-saving bulb with movement sensor is integrated into the device and illuminates the waste disposal area. When it is dark outside, it thus helps the consumers to always find the correct slots for all recyclable materials and in addition to that prevents effectively that the recycling area is being confused with other places.